Microwave hybrid fast sintering of red clay ceramics

This work aimed to examine the performance of the hybrid sintering of clay ceramic in a microwave furnace, compared to the sintering process in a conventional furnace. The raw materials were subjected to X-ray fluorescence, loss on ignition (LOI), X-ray diffraction, particle size distribution, real specific mass, and thermogravimetric analyses. The red clay ceramic mass was prepared, extruded, pre-sintered in a conventional furnace at 600°C/60 min, and sintered at temperatures between 700 °C and 1100 °C. The sintering conventional (resistive oven) was carried out for 60 min with a heating rate of 10°C/min. In the microwave furnace, the sintering times were 5, 10, and 15 min, with a heating rate of 50°C/min, with a sintering chamber coated with silicon carbide (susceptor). The sintered specimens were characterized according to linear shrinkage, water absorption, apparent porosity, apparent specific mass, X-ray diffraction, Raman spectroscopy analysis, spectroscopy analysis in the ultraviolet and visible regions, microhardness, and scanning electron microscopy. The results showed that microwave sintering promoted an increase in the microhardness and apparent specific mass, and reduction in water absorption and apparent porosity values, due to greater densification in the microstructure. The best results occurred for specimens sintered at 1100°C.     

Structural and electrical studies of excessively Sm2O3 substituted soft PZT nanoceramics

The solid solution of Pb_1-x Sm_2x/3 (Zr_0.6 Ti_0.4) O₃ ceramics with x = 0.1, 0.2, 0.3, and 0.4 was prepared via the high-energy ball milling technique. Further, the effect of excessive Sm₂O₃ substitution at Pb-site on structural, dielectric, and dc-conductivity properties was studied. The X-ray diffraction (XRD) analysis confirmed that all samples were crystallized with perovskite and pyrochlore diphase form. Excess Sm³⁺ substitution in the PZT system increases the pyrochlore volume fraction from 5 to 20% and induces a structural phase transition from rhombohedral to a tetragonal structure. The microstructural study by TEM and SEM indicated that the particles were spherical with an average size of 43–55 nm. The frequency and temperature-dependent dielectric constant for all compositions was carried out and it is obtained that the dielectric constant decreases with Sm³⁺ content. The phase transition temperature first decreases up to x = 0.2 and then increases for the higher concentration of samarium. The dc-conductivity studies revealed that all samples showed an unusual mixed TCR effect (both positive and negative temperature coefficient of resistance). Such properties of the studied samples indicate that the material is suitable for potential applications in thermistors, and temperature sensors of the automotive, and petroleum industries.     

Exploring the Cold-Adaptation Mechanism of Serine Hydroxymethyltransferase by Comparative Molecular Dynamics Simulations

Cold-adapted enzymes feature a lower thermostability and higher catalytic activity compared to their warm-active homologues, which are considered as a consequence of increased flexibility of their molecular structures. The complexity of the (thermo)stability-flexibility-activity relationship makes it difficult to define the strategies and formulate a general theory for enzyme cold adaptation. Here, the psychrophilic serine hydroxymethyltransferase (pSHMT) from Psychromonas ingrahamii and its mesophilic counterpart, mSHMT from Escherichia coli, were subjected to μs-scale multiple-replica molecular dynamics (MD) simulations to explore the cold-adaptation mechanism of the dimeric SHMT. The comparative analyses of MD trajectories reveal that pSHMT exhibits larger structural fluctuations and inter-monomer positional movements, a higher global flexibility, and considerably enhanced local flexibility involving the surface loops and active sites. The largest-amplitude motion mode of pSHMT describes the trends of inter-monomer dissociation and enlargement of the active-site cavity, whereas that of mSHMT characterizes the opposite trends. Based on the comparison of the calculated structural parameters and constructed free energy landscapes (FELs) between the two enzymes, we discuss in-depth the physicochemical principles underlying the stability-flexibility-activity relationships and conclude that (i) pSHMT adopts the global-flexibility mechanism to adapt to the cold environment and, (ii) optimizing the protein-solvent interactions and loosening the inter-monomer association are the main strategies for pSHMT to enhance its flexibility.     

Effect of Cu-Rich Phase Precipitation on the Microstructure and Mechanical Properties of CoCrNiCux Medium-Entropy Alloys Prepared via Laser Directed Energy Deposition

CoCrNiCux (x=0.16,0.33,0.75,and 1) without macro-segregation medium-entropy alloys (MEAs) was prepared using laser directed energy deposition (LDED).The microstructure and mechanical properties of CoCrNiCux alloys with increas-ing Cu content were investigated.The results indicate that a single matrix phase changes into a dual-phase structure and the tensile fracture behaviors convert from brittle to plastic pattern with increasing Cu content in CoCrNiCux alloys.In addi-tion,the tensile strength of CoCrNiCux alloys increased from 148 to 820 MPa,and the ductility increased from 1 to 11％with increasing Cu content.The nano-precipitated particles had a mean size of approximately 20 nm in the Cu-rich phase area,and a large number of neatly arranged misfit dislocations were observed at the interface between the two phases due to Cu-rich phase precipitation in the CoCrNiCu alloy.These misfit dislocations hinder the movement of dislocations during tensile deformation,as observed through transmission electron microscopy.This allows the CoCrNiCu alloy to reach the largest tensile strength and plasticity,and a new strengthening mechanism was achieved for the CoCrNiCu alloy.Moreover,twins were observed in the matrix phase after tensile fracture.Simultaneously,the dual-phase structure with different elastic moduli coordinated with each other during the deformation process,significantly improving the plasticity and strength of the CoCrNiCu alloy.     

油品运输中减少能耗的精细化管理措施分析

油品具有两个基本的物理特性,第一个是挥发性,第二个是易燃性。这些物理特性使得油品在运输过程中的能耗现象非常常见,有时候还会引发安全事故。为了让油品在运输过程里面的能耗得到更加有效的控制,就应该对油品消耗管理体系加以改进,使能源能耗控制管理模式的层次不断提升。此外还要对水电气能源进行多层次管理,从而提升企业整体效益并实现节约能源的目标。本文主要对油品运输中优品损耗的精细化管理措施加以研究。     

Achieving High Electroluminescence Efficiency and High Color Rendering Index for All-Fluorescent White OLEDs Based on an Out-of-Phase Sensitizing System

Sensitizing conventional fluorescence (CF) dopants with thermally activated delayed fluorescence (TADF) materials has achieved considerable progress, by which the advantages of TADF materials and CF dopants can be fully harnessed. However, the usually used co-phase configuration of CF dopant-engaged sensitizing systems often encounters exciton loss due to Dexter energy transfer (DET). Herein, an effective out-of-phase configuration is proposed to sensitize CF dopants in the fabrication of white organic light-emitting diodes (WOLEDs). Based on a new efficient sky-blue TADF luminogen DCP-BP-DPAC which has an electroluminescence (EL) peak at 486 nm and an EL efficiency of 26.6%, a green TADF material BDMAC-XT, and a red CF dopant DBP sensitized by BDMAC-XT through an out-of-phase configuration without interlayer, efficient WOLEDs are successfully fabricated. By further adopting orange TBRB or 4CzTPNBu as intermediate sensitizers, more efficient energy transfer to DBP is achieved via Förster energy transfer. Through step-by-step energy transfer and elimination of excess DET process, high-performance all-fluorescent WOLEDs are achieved, providing excellent EL efficiencies over 23.0%, and highly stable white light with a high color rendering index of 87. The outstanding EL performance and high-quality emission color demonstrate the great potential of the proposed out-of-phase design for sensitizing systems of WOLEDs.     

Effects on the crystallite growth behavior of LaPO4 nanopowders and its mechanical properties

The effects of pH of the reaction solution and the concentration of phosphoric acid on the crystal growth behavior of LaPO₄ crystallites were investigated and the mechanical properties of rare-earth phosphates were compared. As a result, the concentration of phosphoric acid of 10% was beneficial to the crystal growth of LaPO₄ nanocrystalline. When the pH value of the reaction solution was 2, the size of LaPO₄ crystallites increased gradually with the increasing reaction temperature, and the smallest crystallite size of 43.27 nm was obtained after heat-treatment at 1000 °C. Simultaneously, the activation energy for crystal growth of LaPO₄ nanocrystalline was relatively lower (26.82 kJ mol⁻¹). With the decreasing radii of rare-earth ions, the hardness, Young's modulus and fracture toughness of the bulk rare-earth phosphates exhibited a reduced tendency, resulted from the increase of porosity under the same preparation process.     

Long-term performance analysis of chemical filters in clean rooms based on a prediction model

Chemical filters are the most important devices for removing gas-phase pollutants in clean rooms. However, the testing concentration of chemical filters is too high for reflecting their performance in a real clean room environment. This study tested the adsorption performance of chemical filters in the two most commonly used shapes at different concentrations. Then, the Langmuir equation and Wheeler-Jonas kinetic equation were combined to establish an adsorption performance prediction model of chemical filters under actual conditions. The predicted values of the model were in good agreement with the experimental results, which indicated the high accuracy of the prediction model. The model does not need to test the microscopic parameters of the adsorbent and can maintain high accuracy at low concentrations. A fast method for calculating the service life of chemical filters was also presented. Based on this model, the total cost of using a chemical filter with a high carbon content in microelectronic clean rooms could be decreased by 45% due to decreasing the number of filter replacements over 3 months. So a chemical filter with a high carbon content should be preferred over a filter with low resistance in microelectronic clean rooms.     

Hydrogel photocatalysts for efficient energy conversion and environmental treatment

Photocatalysts have attracted great research interest owing to their excellent properties and potential for simultaneously addressing challenges related to energy needs and environmental pollution. Photocatalytic particles need to be in contact with their respective media to exhibit efficient photocatalytic performances. However, it is difficult to separate nanometer-sized photocatalytic materials from reaction media later, which may lead to secondary pollution and a poor recycling performance. Hydrogel photocatalysts with a three-dimensional (3D) network structures are promising support materials for photocatalysts based on features such as high specific surface areas and adsorption capacities and good environmental compatibility. In this review, hydrogel photocatalysts are classified into two different categories depending on their elemental composition and recent progresses in the methods for preparing hydrogel photocatalysts are summarized. Moreover, current applications of hydrogel photocatalysts in energy conversion and environmental remediation are reviewed. Furthermore, a comprehensive outlook and highlight future challenges in the development of hydrogel photocatalysts are presented.     

新型无机内保温涂层的性能及应用

根据水泥烧成热耗的组成，降低高温设备表面散热是降低水泥烧成热耗的重要途径之一，而减少高温窑炉墙壁的热传导可有效降低设备的表面散热。本文在介绍无机内保温涂层隔热原理的基础上，对保温涂层的应用效果进行了对比研究，通过在传统耐火隔热材料的基础上增加新型无机内保温涂层，可有效降低高温设备外表面温度，减少水泥生产中的散热损失，达到节能降耗的目的。